SHOP MOUNTS GENUINE MINI HIGH-PERFORMANCE GEARBOX MOUNT — F...
Genuine MINI high-performance gearbox mount for B48 MINI F56 F55 F60 (F-Series)
MINI

Genuine MINI High-Performance Gearbox Mount — F-Series

$165.00

This is the genuine MINI factory gearbox mount in its upgraded specification. Not an aftermarket replacement. Not polyurethane. Same factory tolerances, same OEM supplier, same metal bracket geometry as the standard MINI mount — but with a higher-durometer rubber bushing engineered for sustained load.

MINI builds the standard F-series gearbox mount to a comfort spec. The bushing is intentionally soft to filter drivetrain vibration out of the cabin. That softness shows up as drivetrain deflection on hard launches, sustained boost, and aggressive shifts — the transmission rocks under load, gear engagement feels imprecise, and the mount itself wears faster than it should once you start driving the car hard.

The upgraded mount is the same part in a stiffer durometer. MINI engineered the higher-spec version for a more demanding application within the F-series lineup — same bolt pattern, same external geometry, different rubber. The drivetrain stops deflecting. Pedal input goes directly to forward motion.

The trade-off

You will hear and feel the engine more at idle. There is a small amount of additional cabin NVH — the same sound and the same buzz, just less filtered. On a daily-driven car you notice it for two days, then your ears adjust and you stop hearing it. On a track car it's the right answer from day one.

What it does

  • Reduces drivetrain deflection under launch, sustained boost, and gear changes
  • Sharpens the connection between pedal input and forward motion
  • Extends mount service life on cars driven hard — the standard mount fails the soft rubber, not the bracket

Fitment

MINI F-series — F54 Clubman, F55, F56, F57, F60 Countryman — with either manual or automatic transmission. Same gearbox mount across the platform. Direct fit replacement for the standard MINI mount.

What this is and isn't

This is the gearbox-side mount only. The complementary engine-side mount is a separate part. For full drivetrain stiffening, both should be replaced together. Contact sales@essewerks.com if you want the matching engine mount sourced alongside this order.

Install

1.5 hrs. Subframe stays in place; the mount is accessible from above with the airbox lifted. Standard hand tools, torque to spec, done.

Genuine MINI factory part. BMW/MINI manufacturer warranty applies.

Fits engines B36 · B37 · B38 · B46 · B48
Fits chassis F54 · F55 · F56 · F57 · F60
Category Mounts
Manufacturer MINI
Install effort ~1.5 hours

Ships from Boca Raton, FL.